box loom, Norwegian Cradle Loom, tape loom

Posted by Tropical Twister under Articles , My Looms , Tape Looms , Weaving 
[2] Comments 

I’ve completed the second tape. As you can see from the photos below, the first tape that was completed with the paddle loom alone, backstgrap fashion, has very inconsistent widths. The second, my first tape on the cradle loom, was much more consistent. With some practice, I should be able to produce fairly consistent tapes.

band 2band 1

The next project I’d like to try on this loom is with finer cotton thread and a floating pattern weft. I’ll keep you posted.

Tropical Twister

 

Sewing Machine Stand Table

Posted by Tropical Twister under Articles , Lacy's Story , My Looms , Rigid Heddle , Tape Looms , Techniques , Weaving 
No Comments 

My plans to use a sewing machine stand as the base for a “weaving accessories table” are moving forward. I purchased a “table top” from Lowes, a laminated 3/4″ plank 24″ by 16″. I glued 2 – 2 by 4 pieces to the underside. I then stained the top and started to layer latex spar varnish to make the finished table water resistant.

notchtable undertable top

In between coats of stain and varnish, I worked on my tape. It seems to be progressing nicely. You can see the finished tape winding up on the cloth beam.

cradle loom

Sitting on the deck in the mountains…70 degrees…life is good, least for me. Lacy doesn’t look too thrilled to be wearing her 4th of July outfit.

Lacy

Tropical Twister

 

Norwegian Cradle Loom

Posted by Tropical Twister under Articles , My Looms , Rigid Heddle , Tape Looms , Weaving 
[3] Comments 

The set-up and weaving process for the Norwegian Cradle Loom with a rigid heddle is as follows. First, I used locker hooking twine, pre-cut lengths of soft string, to tie loops of equal length through all the holes on the warp beam and the cloth beam.

loom 2loom 3

I threaded the paddle style tape loom (mine is from Fred & Grace Hatton, Finn Sheep) according to the diagram from Handwoven Magazine, Interweave Press using the warp color order directed for “tape loom or rigid heddle loom”. I tied small bundles of the warp to the twine loops on the warp beam. When all the warp had been tied, I slowly turned the warp beam to wind on all the warp. To keep the warp from getting tangled and to assure an even draw of thread, I wound a length of drawer/shelf paper somewhat narrower than the warp beam with the warp threads. Then I tied the thread coming from the warp beam and through the paddle tape loom to the loops on the cloth beam. With everything in place I was ready to weave. By lifting the paddle up for one pass and pushing it down for the next it created alternating sheds for a nice tabby weave.

The first weft thread, which was later discarded, was thick white cotton. Several passes caused the warp to tighten up. Then I started weaving with my warp. I selected crochet cotton size 10 to use as weft. The weft needs to be finer than the warp. My warp is cotton rug warp, that is, rather heavy cotton. I am using black as my weft color choice as my pick was between black or white at WalMart. I would have prefered brown to match the outside warp threads. (Not a lot of choices here in the mountains. I stopped at a quilt shop but they were closed to prepare for Christmas in July, what are the chances of that happening, so I pressed on to WalMart.) While the weft “does not” show in warp dominate weaving, it does; it shows slightly on the edge of the tape. Actually, the black works just fine against the brown warp threads. After I wove an inch or so, I removed the white cotton yarn and left just the final tape threading. I plan to go back and secure the end before it is removed from the loom.

I love the loom!! My tape is much more regular than when I used the paddle loom alone as a back strap loom, as I am able to maintain the tension. I expect to try some other projects with this cradle loom when this tape is done, perhaps card weaving.

loom 4loom 5

Tropical Twister

 

Cradle Loom, Box Loom, Tape Loom, Band Loom

Posted by Tropical Twister under Articles , My Looms , Rigid Heddle Projects , Tape Looms , Weaving 
[3] Comments 

loom 1This “cradle loom” is from the Vesterheim Norwegian-American Museum and called a Norwegian Cradle Loom. Generically, it is a box loom (named for the shape of the loom), tape loom (named for the “tapes” or strips of cloth produced on the loom) or as the Sweds term it, a band loom (named for the decorative bands woven on the looms and used to decorate clothing). Box tape looms probably originated among the Germans and traveled to Sweden and Norway. Germans brought tape loom weaving with them to this country as evidenced by the “Pennsylvania Dutch” tape weaving traditions.

I represent Glimakra looms and if you’re interested, you can purchase a Glimakra Swedish Band Loom through me. Other sources I found for Box Tape Looms, Band Looms, Paddle Looms, and Floor Two Treadle tape looms are (click on source name to be linked to source):

J. K. Sidel
Hand Woven Magazine
The Joyner’s Shop
Fred & Grace Hatton, Finn Sheep
TapeLooms.com
Link to photos of Swedish tapes

This photo shows my loom “dressed” for weaving. I am using a “rigid heddle” to separate the threads to create a “shed” for weaving. The hand held “paddle loom” or “tape loom” can be used separately from the box loom. One end of the warp can be tied to something solid and the other end can be held in ones hand. Moving the paddle up and down a “shed” is created through which the yarn/weaving material is passed. While very portable, I have found that it is difficult to maintain a constant tension with this method, and therefore the band or tape is inconsistent in width. Using the box loom, the rollers which are attached to gears maintain a constant tension and the width is more consistent. I have used shelf lining paper to roll up with warp on the “warp beam”/roller. It keeps the layers of warp from tangling and helps maintain tension on the warp.

The band created by this loom will appear in future blog entries.

Tropical Twister

 

We made it to the mountains!

Posted by Tropical Twister under Articles , Handspun Knitted Shawl PATTERN , My Looms , Queen Anne's Lace Shawl , Techniques , Weaving 
No Comments 

First, with great joy, we attended the wedding of Chris (my husband’s son) and his new bride, Yasuko.

13

…Then we headed to the mountains.

45

My chairs were “sprinkled” through the woods and we set out projects on the deck.

123

The loom is here. I had ordered a stainless steel reed (5″) but it was too long when it arrived. I returned it (thank you Glimarka) and they sent a new reed. But alas, this one is too shallow (4″). I’ll be returning it and ordering another. Meanwhile, I’ll try to use the old rusted reed. More on that project is upcoming blogs.

11

I have a new project (more about that in subsequent blogs), a Norwegian box loom. Box looms probably originated in Germany and migrated to Sweden and Norway. The loom comes unfinished so it can be painted, stained or oiled. I’ve been coating it with antique oil finish and plan to bath it in orange oil and bee’s wax after the finish drys.

7

Tropical Twister

 

UPDATE

Posted by Tropical Twister under Articles , My Looms , Weaving 
[4] Comments 

Loom is finished. Mended the aprons and re-installed. (Don’t love the oversized washers but there was a crack on the beater bar. I glued it and the large washers support the repair.) Now just waiting for the heddles and new reed.

dscn0880

And, I’ve started my second band; this one of rayon.

dscn0882

Tropical Twister

 

Kessenich 4/4 Floor Loom Progress

Posted by Tropical Twister under Articles , My Looms , Weaving 
[4] Comments 

Restoring the Kessenich 4/4 floor loom is progressing. I need to resew the apron to reinforce where stiching is coming undone and then remount the aprons. Instead of new, I chose to wash the aged canvas aprons. They are still strong (although aged looking) because I think they complement the loom. The loom originally must have had wire heddles as I received a fist full of those with the loom. Apparently, they had been replaced with flat steel heddles at some point. Some of those have reusted and I’ve decided to replace al the heddles with texsolv heddles because the heddles won’t rust and they’re quiet. They’re in transit from Louet so “I’m a waiting”. I’m also waiting for a stainless steel reed from Glimarka to replace the heavily rusted reed. Everything else looks good, least wise to my eyes. See what you think?

6-14-2009

sewing-machineOh, and that antique sewing machine frame to the right. I picked that up at our annual church garage sale two years ago. I’m planning to drag that up to the mountains as well (yes, my husband must love me! LOL). I’m planning to turn it into a table. The treadly moves the wheel and it works.

Tropical Twister

 

Glimakra Band Loom

Posted by Tropical Twister under Articles , My Looms , Tape Looms , Weaving 
[5] Comments 

I’ve become enchanted by small bands created by inkle, box and tape looms, but have been frustrated with my inability to maintain tension. I’ve discovered the Gilmakra Band Loom and the problem is solved:

bandloom

I am so excited by the band loom and their new “Julia” loom that I’ve become a distributor. The band loom ships in a flat box but is easy (even for me) to assemble. On the loom below, my first band on this loom. It’s kakai, peach and aqua 8/2 cotton.

21

Watch here for more bands.

Tropical Twister

 

Kessenich 4/4 Floor Loom

Posted by Tropical Twister under Articles , My Looms 
1 Comment 

Spent the better part of the weekend cleaning up the new loom. The wood underneath the water damaged/aged finish is beautiful. I used MinWax refinisher which broke down the old finish but unlike stripper didn’t strip/bleach the finish. It’s an old loom and I like the age marks that bear witness to it’s years of service…I just didn’t want it to look “nasty”/dirty. Here’s the loom in process. I took it all apart (with the help of my husband…lots of help) and I’m in the process of changing much of the hardware (bolts, screws, nuts, etc.) over to stainless steel so I won’t have the same rust problems. Many of the “fittings” were frozen by rust. Can anyone give a guess as to age from the brass identifying plate?

2-32-2

Tropical Twister

 

Kessenich Floor Loom

Posted by Tropical Twister under Articles , My Looms 
[2] Comments 

I had been hoping to find a small rugged loom to haul up to the mountains that could live on the deck upon which I could weave rugs and/or scarves. I found it. It’s pretty rough but a diamond in the rough! This is a Kessenich Loom, they’re valued as work horses. The loom is probably from the 1960’s. It was hand made from sold red oak. It’s mostly all there, I think. I plan to do some cleaning this weekend. The finish is pretty much done. Most of the screws are frozen. It’s a project but I expect well worth the investment ($197) off eBay. I was able to pick it up locally (which is rare in Florida) which saved me shipping. More about this loom as the project developes.1-blog

1-blog-too

Tropical Twister

 

« Previous PageNext Page »