Sunna Double Slotted Rigid Heddle 13 Pattern Thread Project

Posted by Tropical Twister under Articles , Projects , Weaving , Weaving 
No Comments 

The Sunna Double Slotted Rigid Heddle is unique in that it allows the 13 pattern threads to remain in the center of the warp opening whether the heddle is in the up or down position. This allows the weaver to easily pick-up pattern “picks”.

I designed a “tape” or “band” with a picked celtic pattern in yellow on red in the center or the band with a blue, white, yellow and red narrow pattern on each edge. First I warped the planned design. At first I used a yellow weft thread but I didn’t like the speckled yellow on red background so I switched to red weft. All the thread is 8/2 cotton but I doubled the design threads, treating them as a single thread.

To manage the thread while I warped, I borrowed a iron rod from the apron of my 4/4 floor loom and spread it between the runs of the sides of an old oak babby crib that I’ve repurposed as a drying rack. I spread the sides to better accomodate the spools of thread.

The heddle was threaded; pattern threads in the short slots. I used a Stoorstalka threader which I loved to thread the heddle. My only complaint, lost one (threader) to the carpet. Despite getting on hands and kneeds, still haven’t found it.

To follow the pattern while I wove, I used a ruler with sticky magnets attached to the reverese. Used a dollar store metal message board and the ruler to move along easily and without worring if pattern would float away.

Wound the threads onto the cradle loom and began weaving. What a joy … The Suynna is truely linnovative and a delight to use! Was a tad too large for the cradle loom, but workable.

 

Leave a Reply